can you install wireshark onto a endian firewall

Next to each network interface port is (1) the link status which indicates if there is a device actually connected to the port, (2) NIC device driver description, (3) network MAC address, and (4) the operating system physical device name. A network zone with multiple network interfaces will act as a bridge and mimic the behavior of a switch though using an actual physical switch is recommended where performance and efficiency are desired.

You may check or uncheck one or more network interfaces to belong to a network zone (at least one is required) and you may have more than one physical interface per zone however, you cannot have one physical inteface belong to more than one zone.

The next item is a graphical representation of the available physical network interfaces and which zone they are mapped to. The blue zone is assigned the network 172.20.100.1/24, hence the Blue interface has IP 172.20.100.1 An example of where this might be used is if you host multiple internal subnets that all need to exist within the same network segment (within one zone). You are also allowed to add additional networks that may co-exist within each single network zone. The default Green IP is provided for you but you can use any IP address and subnet you wish. The next step involves configuring the actual IP address you want assigned to the Endian device for each existing network zone.

Can you install wireshark onto a endian firewall